Third-Generation Display Technology: Nominally Transparent Material
Keywords:Display Technology, Disruptive Technology, Radical Innovation, Technology S-Curve, Business Model, Technology Strategy, Liquid Crystal Display, Light Emitting Diode, Plasma Display, Wireless Network, Access Point, Glass Technology, Management
AbstractDisplay technology is reshaping the consumer, business, government, and even not-for-profit markets in the midst of the digital convergence, coupled with recent smart phones led by Apple, Inc.
First-Generation (1G) display technology was dominated by the Cathode Ray Tubes, followed by Liquid Crystal Display and Plasma in 2G. A radically innovative shift as a disruptive technology is expected to follow in 3G to utilize virtually any transparent material, which wirelessly connects to portable access points.
This paper studies the feasibility of the 3G Display Technology (DT) with Technology S-Curves, and presents possible business models and technology strategies which may be generated from it. Additional subsets of business models may be derived for a wide range of industry applications.
ACS, Z.,Anselin, L.,Varga,A. (2002). Patents and Innovation Counts as Measures of Regional Production of New Knowledge. Research Policy, 31 (7), pp. 1069-1085.
ADNER, R. (2001). Demand Heterogeneity and Technology Evolution: Implications for Product and Process Innovation. Management Science, 47 (5), pp. 611-628.
ADNER, R. (2002). When are Technologies Disruptive? A Demand-based View of the Emergence of Competition. Strategic Management Journal, 23 (8), pp. 667-688, August,.
ADNER, R. Zemsky, P. (2005). Disruptive Technologies and the Emergence of Competition. RAND Journal of Economics, 36 (2), pp. 229-254,.
ANDERSON, E. G., Parker, G. G. (2002). "The Effect of Learning on the Make/Buy Decision," Productions and Operations Management, 11 (3), pp. 31 3-339.
APPLEGATE, L. M., Austin, R. D., Soule, D. L (2009) Corporate Information Strategy and Management: 8 Ed., McGraw-Hill Publishing.
BURGELMAN, R. A., Christensen, C. M., Wheelwright, S. C. (2009). Strategic Management of Technology and Innovation: 5 Ed., McGraw-Hill Publishing.
CARRILLOJ. E. (2005). "Industry Clockspeed and the Pace of New Product Development," Productions and Operations Management, 14 (2), pp. 125-141, Summer.
CHAN, S. (2006). "Strategy Development for Anticipating and Handling a Disruptive Technology," Journal of the American College of Radiology, 3 (10), pp. 778-786, October.
CHRISTENSEN, C. M. (1992a)."Exploring the Limits of the Technology S-Curve. Part I: Component Technologies," Productions and Operations Management, 1 (4), pp. 334-357.
CHRISTENSEN, CM. (1992b). "Exploring the Limits of the Technology S-Curve. Part II: Architectural Technologies," Productions and Operations Management, 1 (4), pp. 358-366.
CHRISTENSEN, C. M., Raynor, M. E. (2004).The Innovator's Solution: Creating and Sustaining Successful Growth, Harvard Business School Press.
COHEN, M. A., Eliashberg, J., Ho,T H. (2000). "An Analysis of Several New Product Performance Metrics," Manufacturing and Service Operations Management, 2 (4), pp. 337-349.
DAY, G. S. Schoemaker, P. J. H. (2000), "Avoiding the Pitfalls of Emerging Technologies," California Management Review, 42 (2),pp.8-33,Winter.
DAHLIN, K. B. Behrens, D. M. (2005),"When is an Invention really Radical? Defining and Measuring Technological Radicalness," Research Policy, 34 (5), pp. 717-737.
DANEELS, E. (2004). "Disruptive Technology Reconsidered: A Critique and Research Agenda," Journal of Product Innovation Management, 21 (4), pp. 246-259,July.
DRUEHL, C. T, Schmidt, G. M. (2008) "A Strategy for Opening a New Market and Encroaching on the Lower End of the Existing Market," Productions and Operations Management, 17 (1), pp. 44-60,January-February.
EISENHARDT, K. M., Tabrizi, B. N. (1995). "Accelerating Adaptive Process: Product Innovation in the Global Computer Industry," Administrative Science Quarterly, 40 (1), pp. 84-1 10.
GANGULY, A., Nilchiani, R., FarrJ.V. (2010). "Defining a Set of Metrics to Evaluate the Potential Disruptiveness of a Technology," Engineering Management Journal, 22 (1), pp. 34-44, March.
GATIGNON, H., Tushman, M. L, Smith, W, Anderson, P. (2002), "A Structural Approach to Assessing Innovation: Construct Development of Innovation Locus, Type, and Characteristics," Management Science, 48 (9), pp. 1103-1122.
GILBERT, C. (2003). "The Disruption Opportunity," MIT Sloan Management Review, 44 (4), pp. 27-32, Summer.
GOVINDARAJAN,V., Praveen, K. K. (2006), "Disruptiveness of Innovations: Measurement and an Assessment of Reliability and Validity," Strategic Management Journal, 27 (2), pp. 189-199, February.
GRIFFIN, A. (1993). "Metrics for Measuring Product Development Cycle Time," Journal of Product Innovation Management, 10 (2), pp. 112-125.
HAUSER, J., Tellis, G. J., Griffin, A. (2006). "Research on Innovation: A Review and Agenda for Marketing Science," Marketing Science, 25 (6), pp. 687-717.
HENDERSON, R. M. (1993). "Underinvestment and Incompetence as Responses to Radical Innovation: Evidence from the Photolithographic Alignment Equipment Industry," RAND Journal of Economics, 24 (3), pp. 248-270.
HENDERSON, R. M. (2006). "The Innovator's Dilemma as a Problem of Organizational Competence," Journal of Product Innovation Management, 23 (1), pp. 5-11.
HULTINK, E. J., Robben, H. S. J. (1995). "Measuring New Product Success: Differences that Time Perspective makes," Journal of Product Innovation Management, 12 (5), pp. 392-405.
KASSICIEH, S. K., Walsh, S.T., CummingsJ. C, McWhorter, J., Romig, A. D., Williams, W D. (2002). "Factors Differentiating the Commercialization of Disruptive and Sustaining Technologies," IEEE Transactions on Engineering Management, 49 (4), pp. 375-387, November.
KELLER, E. D. W (2005). Anatomy of Disruptive Technologies: Analyses and Comparison, Doctoral Dissertation, Kent State University Graduate School of Business.
KHURANA, A. Rosenthal, S. R. (1997). "Integrating the Fuzzy Front End of New Product Development," IEEE Engineering Management Review, 25 (4), pp. 35-49.
KIM,W. C, Mauborgne, R. (2004). "Blue Ocean Strategy" Harvard Business Review, 82 (10), pp. 76-84, October.
KOSTOFF, R. N., Boylan, R., Simmons, G. R. (2004), "Disruptive Technology Roadmaps," Technological Forecasting and Social Change, 71(1 -2), pp. 141 -159, January-February.
KRISHNAN,V, Loch, C. H. (2005). "A Retrospective Look at Production and Operations Management Articles on New Product Development," Productions and Operations Management, 14 (4), pp. 433-441 .Winter.
KRISHNAN,V, Ulrich, K.T. (2001). "Product Development Decisions:A Review of the Literature," Management Science, 47 (1),pp. 1-21.
LINTONJ. D. (2002). "Forecasting the Market Diffusion of Disruptive and Discontinuous Innovation," lEEETransactions on Engineering Management, 49 (4), pp. 365-374, November.
LOCH, C. H., Stein, L, Terwisch, C. (1996). "Measuring Development Performance in Electronics Industry," Journal of Product Innovation Management, 13 (1), pp. 3-20.
LYYTINEN, K. Rose, G. M. (2003). "The Disruptive Nature of Information Technology Innovations: The Case of Internet Computing in Systems Development Organizations," MIS Quarterly, 27 (4), pp. 557-595, December.
MAHAJAN, V, Muller, E., Wind, Y. (2000) New Product Diffusion Models, Kluwer Academic Press, Boston, MA,
MALLICK, D. N. Schroeder, R. G. (2005). "An Integrated Framework for Measuring Product Development Performance in High Technology Industries," Productions and Operations Management, 14 (2), pp. 142-158, Summer.
MEYER, M. H., Utterback, J. M. (1995). "Product Development Cycle Time and Commercial Success," IEEE Transactions on Engineering Management, 42 (4), pp. 297-303.
MISHRA, S., Desmukh, S. G., Vrat, P. (2002). "Matching of Technological Forecasting Technique to a Technology," Technological Forecasting and Social Change, 69 (1), pp. 1-27.
MOORTHY, K. S., Png, I. P. L. (1992)."Market Segmentation Cannibalization and the Timing of Product Introductions," Management Science, 38 (3), pp. 345-359.
PAE, J. H., Lehmann, D. R. (2003) "Multigeneration Innovation Diffusion: The Impact of Intergeneration Time," Journal of the Academy of Marketing Science, 31 (1), pp. 36-45.
RAMDAS, K. (2003). "Managing Product Variety: An Integrative Review and Research Directions," Productions and Operations Management, 12 (1), pp. 79-101.
RAO, B.,Angelov, B., Nov, O. (2006). "Fusion of Disruptive Technologies: The Lesson from the Skype Case," European Management Journal, 24 (2-3), pp. 174-188, April-June.
REITZIG, M. (2003). "What determines Patent Value? Insights from the Semiconductor Industry," Research Policy, 32 (1),pp. 13-26.
SAMSUNG ELECTRONICS (2010). Transparent AMOLED Technology for Laptops and Notebook Computers, http://www.youtube.com/watch?v=FoK9XIZNz0l, January.
SCHILLING, M. A. (2008). Strategic Management of Technological Innovation: 2 Ed., McGraw-Hill Publishing.
SCHMIDT, G. M., Druehl, C.T. (2005)."Changes in Product Attributes and Costs as Drivers of New Product Diffusion and Substitution," Productions and Operations Management, 14 (3), pp. 272-285, Fall.
SOOD, A., Tellis, G.J. (2005). "Technological Evolution and Radical Innovation," Journal of Marketing, 69 (3), pp. 152-168, July.
SOUZA, G., Bayus, B. L, Wagner, H. M. (2004). "New-Product Strategy and Industry Clockspeed," Management Science, 50, (4), pp. 537-549.
TAKEUCHI, H., Nonaka, I. (1986). "The New Product Development Game," Harvard Business Review, 64 (1), pp. 137-146, January-February.
VAN DEN BULTE, C. (2000). "New Product Diffusion Acceleration: Measurement and Analysis," Marketing Science, 19 (4), pp. 366-380.
WALSH, S. T., Linton, J. D. (2000). "Infrastructure for Emergent Industries based on Discontinuous Innovation," Engineering Management Journal, 12 (2), pp. 23-31 June.
WALSH, S. T., Kirchhoff, B. A., Newbert, S. (2002), "Differentiating Market Strategies for Disruptive Technologies," IEEE Transactions on Engineering Management, 49 (4), pp. 341-351, November.
WILLOW, C. C. (2007). "Qualitative Decision Making with Integrated Systems Design Methodology," Journal of Engineering and Technology Management, 24 (3), pp. 262-286, September.
WINTER, S. G. (2003). "Understanding Dynamic Capabilities," Strategic Management Journal, 24 (10), pp. 991 -995.
ZEITHAML, V. A. (1988). "Consumer Perceptions of Price, Quality, and Value: A Means-End Model and Synthesis of Evidence," Journal of Marketing, 52 (3), pp. 2-22.
ZIRGER, B. J., Maidique, M. (1990). "A Model of New Product Development: An Empirical Test," Management Science, 36 (7), pp. 867-883.
Accepted November 10, 2010
How to Cite
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).