The Knowledge Body of Requirement Engineering in IST Innovations: An Ontological Analysis

Authors

  • Jonathan Patricio Vasquez Universidad de Valparaíso, Ingeniería en Información y Control de Gestión, Escuela de Auditoría, Centro de Investigación en Negocios y Gestión Empresarial https://orcid.org/0000-0002-6907-0088
  • Ariel La Paz Department of Management Control and Information Systems, Faculty of Economics and Business, University of Chile https://orcid.org/0000-0001-8920-2335

DOI:

https://doi.org/10.4067/S0718-27242019000400078

Keywords:

Requirement Engineering, Ontological Analysis, Digital Transformation, Innovation, Information System

Abstract

Requirement Engineering is considered a key factor for Information Systems and Technology (IST) success in innovation. After roughly 40 years, important questions about the impact of RE in innovations remains. Literature review and bibliometric reports are well-known techniques for describing the state of the art; however, both can cover what has been done, but fail to identify the less developed areas. An alternative method is used to describe the whole knowledge body of RE (KBoRE) for IST innovations, and then systematically identify the most, less and uncovered areas. This paper proposes an Ontological framework of the KBoRE for IST innovations, by decomposing it through the identification of taxonomies and concepts that represent the field. Then, we apply the ontology to map articles from SCOPUS and WoS databases. Results reveal emphases that help to design research agendas and feed the KBoRE for IST Innovations to fill the gaps between the academic curiosity and the industry progress.

Downloads

Download data is not yet available.

References

Ambreen, T., Ikram, N., Usman, M., & Niazi, M. (2018). Empirical research in requirements engineering: trends and opportunities. Requirements Engineering, 23(1), 63–95. https://doi.org/10.1007/s00766-016-0258-2

Cancino, C. A., La Paz, A. I., Ramaprasad, A., & Syn, T. (2018). Technological innovation for sustainable growth: An ontological perspective. Journal of Cleaner Production, 179, 31–41. https://doi.org/10.1016/j.jclepro.2018.01.059

Cheng, B. H., & Atlee, J. M. (2007, May). Research directions in requirements engineering. In 2007 Future of Software Engineering (pp. 285-303). IEEE Computer Society. https://doi.org/10.1109/fose.2007.17

Cleland-Huang, J., Rahimi, M., & Mirakhorli, M. (2015). Ready-Set-Transfer! Technology transfer in the requirements engineering domain. 2015 IEEE 23rd International Requirements Engineering Conference (RE), 412–413. https://doi.org/10.1109/RE.2015.7320461

Coronado, F., La Paz, A., Ramaprasad, A., & Syn, T. (2015). Navigating the complexity and uncertainty of higher education systems: Ontology mapping of Chile’s universities. HERDSA, Learning for Life and World in a Complex World, Australia. ISBN 978-0-908557-96-7

Daneva, M., Damian, D., Marchetto, A., & Pastor, O. (2014). Empirical research methodologies and studies in Requirements Engineering: How far did we come? Journal of systems and software, 95(12), 1–9. https://doi.org/10.1016/j.jss.2014.06.035

Edquist, C. (1996). Systems of innovation approaches: their emergence and characteristics. Univ. https://doi.org/10.1093/oxfordhb/9780199286805.003.0007

Geldes, C., Felzensztein, C., & Palacios-Fenech, J. (2017). Technological and non-technological innovations, performance and propensity to innovate across industries: The case of an emerging economy. Industrial Marketing Management, 61, 55–66. https://doi.org/10.1016/j.indmarman.2016.10.010

Guarino, N., Oberle, D., & Staab, S. (2009). What Is an Ontology? In S. Staab & S. R. (Series Ed.), Handbook on Ontologies. https://doi.org/10.1007/978-3-540-92673-3_0

Gunday, G., Ulusoy, G., Kilic, K., & Alpkan, L. (2011). Effects of innovation types on firm performance. International Journal of Production Economics, 133(2), 662–676. https://doi.org/10.1016/j.ijpe.2011.05.014

Heredia Pérez, J. A., Geldes, C., Kunc, M. H., & Flores, A. (2019). New approach to the innovation process in emerging economies: The manufacturing sector case in Chile and Peru. Technovation, 79, 35–55. https://doi.org/10.1016/j.technovation.2018.02.012

Kauppinen, M., Savolainen, J., & Mannisto, T. (2007). Requirements Engineering as a Driver for Innovations. 15th IEEE International Requirements Engineering Conference (RE 2007), 15–20. https://doi.org/10.1109/RE.2007.47

La Paz, A., & Arrúa, K. 2019. Mapa de las Aspiraciones de la Educación Superior en Paraguay. Revista del CLAD Reforma y Democracia, 74(Junio). ISSN 1314-2378

La Paz, A., Merigó, J. M., Powell, P., Ramaprasad, A., & Syn, T. 2019. Twenty‐five years of the Information Systems Journal: A bibliometric and ontological overview. Information Systems Journal: 27. https://doi.org/10.1111/isj.12260

La Paz, A. I., Ramaprasad, A., Syn, T., & Vasquez, J. (2015). An Ontology of E-Commerce - Mapping a Relevant Corpus of Knowledge. Journal of Theoretical and Applied Electronic Commerce Research, 10(2), i–ix. https://doi.org/10.4067/S0718-18762015000200001

Matyokurehwa, K., Mavetera, N., & Jokonya, O. (2017). Requirements Engineering Techniques: A Systematic Literature Review. International Journal of Soft Computing and Engineering, 7 (1), 14-20. https://doi.org/1https://0.23956/ijarcsse/v6i9/01917

Manzano, C. A., Ramaprasad, A., & Syn, T. (2018). Information Systems to Manage Local Climate Change Effects: A Unified Framework. PACIS 2018 Proceedings. 11.

https://aisel.aisnet.org/pacis2018/11 ISBN: 978-4-902590-83-8

Moira, A. (2016, July). How to pick the best requirements management tool. Retrieved March 27, 2019, from CIO Magazine website: https://www.cio.com/article/3053082/how-to-pick-the-best-requirements-management-tool.html

Munir, H., Wnuk, K., & Runeson, P. (2016). Open innovation in software engineering: a systematic mapping study. Empirical Software Engineering, 21(2), 684–723. https://doi.org/10.1007/s10664-015-9380-x

Núñez, A., Neriz, L., Mateo, R., Ramis, F., & Ramaprasad, A. (2018). Emergency departments key performance indicators: A unified framework and its practice. The International Journal of Health Planning and Management, 33(4), 915–933. https://doi.org/10.1002/hpm.2548

Nuseibeh, B., & Easterbrook, S. (2000). Requirements engineering: a roadmap. Proceedings of the Conference on The Future of Software Engineering - ICSE ’00, 35–46. https://doi.org/10.1145/336512.336523

Oke, A. (2007). Innovation types and innovation management practices in service companies. International Journal of Operations & Production Management, 27(6), 564–587. https://doi.org/10.1108/01443570710750268

Parnas, D. L. (1999). Software Engineering Programs Are Not Computer Science Programs. IEEE Softw., 16(6), 19–30. https://doi.org/10.1109/52.805469

Porter, M. E. (1998). Clusters and the new economics of competition (Vol. 76). Boston, MA: Harvard Business Scholl Press.

Pyka, A. (2002). Innovation networks in economics: from the incentive‐based to the knowledge‐based approaches. European Journal of Innovation Management, 5(3), 152–163. https://doi.org/10.1108/14601060210436727

Ramaprasad, A., & Syn, T. (2015). Ontological Meta-Analysis and Synthesis. Communications of the Association for Information Systems, 37(1). https://doi.org/10.17705/1CAIS.03707

Ramaprasad, A., Win, K. T., Syn, T., Beydoun, G., & Dawson, L. (2016). Australia’s National Health Programs: An Ontological Mapping. Australasian Journal of Information Systems, 20. https://doi.org/10.3127/ajis.v20i0.1335

Robertson, J., & Robertson, S. (2000). Volere requirements specification template. Atlantic System Guild www.systemguild.com.

Ruhe, G., Nayebi, M., & Ebert, C. (2017). The vision: Requirements engineering in society. In 2017 IEEE 25th International Requirements Engineering Conference (RE), 478-479. IEEE. https://doi.org/10.1109/re.2017.70

Subramanian, A., & Nilakanta, S. (1996). Organizational innovativeness: Exploring the relationship between organizational determinants of innovation, types of innovations, and measures of organizational performance. Omega, 24(6), 631–647. https://doi.org/10.1016/S0305-0483(96)00031-X

Villela, K., Hess, A., Koch, M., Falcao, R., Groen, E. C., Dorr, J., … Ebert, A. (2018). Towards Ubiquitous RE: A Perspective on Requirements Engineering in the Era of Digital Transformation. 2018 IEEE 26th International Requirements Engineering Conference (RE). https://doi.org/10.1109/re.2018.00029

Yaco, S., & Ramaprasad, A. (2018). Cultural Heritage Semiotics. In Digitisation of Culture: Namibian and International Perspectives. https://doi.org/10.1007/978-981-10-7697-8_4

Zamudio, L., Aguilar, J. A., Tripp, C., & Misra, S. (2017, July). A Requirements Engineering Techniques Review in Agile Software Development Methods. In International Conference on Computational Science and Its Applications (pp. 683-698). Springer, Cham. https://doi.org/10.1007/978-3-319-62404-4_50

Downloads

Published

2019-12-12

How to Cite

Vasquez, J. P., & La Paz, A. (2019). The Knowledge Body of Requirement Engineering in IST Innovations: An Ontological Analysis. Journal of Technology Management & Innovation, 14(4), 78–84. https://doi.org/10.4067/S0718-27242019000400078

Issue

Section

Research Articles

Similar Articles

<< < 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 > >> 

You may also start an advanced similarity search for this article.