The Potential of RFID as an Enabler of Knowledge Management and Collaboration for the Procurement Cycle in the Construction Industry
Keywords:RFID, Collaboration, Knowledge Management, Procurement Cycle, Construction Industry
AbstractAmong the array of innovative ICTs (information and communication technologies), radio frequency identification technology (RFID) can be considered as a major innovation with the potential to offer many new opportunities for construction companies to improve communication, facilitate teamwork, improve information management skills, and encourage greater cross-fertilization between business processes. Empirical results point to the need of the four participating firms to overcome several procurement issues and bottlenecks in order to gain more substantial competitive advantages and consistently satisfy project owners throughout the entire procurement cycle. An RFID system has the potential to improve real-time document and material tracking and control. But, more importantly, findings suggest that RFID improves the management, sharing, and transfer of knowledge and fosters collaboration through integrated document management, prompt issue management, risk management and efficient decision making.
ADRIAANSE, A., Voordijk, H., Dewulf, G. (2010). The use of inter-organisational ICT in United States construction projects. Automation in Construction, 19 (1), 73-83.
AKINCI, B., Boukamp, F., Gordon, C., Huber, D., Lyons, C., Park, K. (2006). Formalism for utilization of sensor systems and integrated project models for active construction quality control. Automation in Construction, 15(2), 124-138.
BARDAKI, C., Pramatari, K., and Doukidis, G. I. (2007). RFID-enabled supply chain collaboration services in a networked retail business environment. In Proceedings of the 20th Bled eConference eMergence: Merging and Emerging Technologies, Processes, and Institutions, Bled, Slovenia, June 2007.
BARROS, A., Barbosa, P. A. P., and Castro, A. (2008). Decision support framework for supply chain collaboration. In Proceedings of POMS 19th Annual Conference, California, USA, May 2008.
BENDAVID,Y. (2008). Étude des phases en amont des projets d’adoption des technologies RFID pour l’amélioration des chaines d’approvisionnement. PhD Thesis, Montreal, Canada.
BENNET, A., Bennet, D. (2000). Characterizing the next generation knowledge organization. Knowledge and Innovation: Journal of the KMCI, 1(1), 8-42.
BENNETT, L.F. (2003). The management of construction: A project lifecycle approach.Taylor and Francis Group, Oxford.
BETTS, M., Lim, C., Marthur, K., Ofori, G. (1991). Strategies for the construction sector in the information technology era. Construction Management and Economics, 9(6), 509-528.
BORADE, A. B., Bansod, S.V. (2007). Domain of supply chain management – A state of the art. Journal of Technology Management & Innovation, 2(4), 109-121.
BOSCHE, F., Teizer, J., Haas, C.T., Caldas, C.H. (2006). Integrating data from 3D CAD and 3D cameras for real-time modeling. In Proceedings of Joint International Conference on Computing and Decision Making in Civil and Building Engineering, Montréal, Canada, June 2006.
BOWDEN, S., Dorr,A.,Thorpe,T.,Anumba, C. (2005). Mobile ICT support for construction process improvement. Automation in Construction, 15(5), 664-676.
CHANG, H., Tzeng, G. (2010). A causal decision making model for knowledge management capabilities to innovation performance in Taiwan’s high-tech industry. Journal of Technology Management and Innovation, 5(4), 137-146.
CHEN, K.,Tsai, H., Liu,Y.Y. (2008). Development of the RFID System for nuclear materials management. In Proceedings of the 49th INMM Meeting, Nashville,TN, July 2008.
CHEN,Y.J., Chen,Y.M., Chu, H.C. (2008). Enabling collaborative product design through distributed engineering knowl- edge management. Computers in Industry, 59(4), 395–409.
CHENG, J.C.P., Kincho, H.L., Bjornsson, H., Jones, A., Sriram, R. (2010). A service oriented framework for construction supply chain integration. Automation in Construction, 19(2), 245-260.
CONSTRUCTION INDUSTRY REVIEW COMMITTEE (CIRC), (2001). Construct for excellence: report of the Construction Industry Review Committee. Hong Kong.
DAVE, B., Koskela, L. (2009). Collaboration knowledge management – A construction case study. Automation in Construction, 18(7), 894-902.
DAVENPORT,T.H. (1993). Process innovation. Harvard Business School Press, Boston.
DAVENPORT,T., Prusak, L. (1998).Working knowledge: How organizations manage what they know. Harvard Business School Press, Boston.
DUFFY, K., Graham, B.,Thomas, K. (2007). Assessing the potential for construction collaboration technologies (CCT) in small to medium enterprises in the Irish construction industry. In Proceedings of the 23rd Annual ARCOM Conference, Belfast, UK, September 2007.
EADIE, R., Perera, S., Heaney, G., Carlisle, J. (2007). Drivers and barriers to public sector e-procurement within Northern Ireland’s construction industry. ITcon, 12, 103-120.
EGBU, C.,Vines, M., Tookey, J. (2003). The role of knowledge management in e-procurement initiatives for construction organizations. In Proceedings of the 19th Annual ARCOM Conference, Brighton, UK, September 2003.
EISENHARDT, K.M. (1989). Building theories from case study research. The Academy of Management Review, 14(4), 532-550.
EISENHARDT, K., Schoonhoven, C.B. (1996). Strategic alliance formation in entrepreneurial firms: Strategic needs and social opportunities for co-operation. Organizational Science, 7(2), 136-141.
ERGEN, E., Akinci, B., East, B., Kirby, J. (2007). Tracking components and maintenance history within a facility utilizing radio frequency identification technology. Journal of Computing in Civil Engineering, 21(1), 11-20.
GOODRUM, P.M., McLaren, M.A., Durfee, A. (2005).The application of active radio frequency identification technology for tool tracking on construction job sites. Automation in Construction, 15(3), 292-302.
HAMMAD, A., Motamedi, A. (2007). Framework for lifecycle status tracking and visualization of constructed facility components. In Proceedings of the 7th International Conference on Construction Applications of Virtual Reality, Pennsylvania, USA, October 2007.
HANSEN, M.T. (2002). Knowledge networks: Explaining effective knowledge sharing in multiunit companies. Organization Science, 13(1), 232-248.
HARRY, K.H., Choy, K.L., Lee, W.B. (2007). A dynamic logistics process knowledge based system – An RFID multi-agent approach. Journal of Knowledge-Based Systems, 20(4), 357-372.
HENTTONEN, K., Pussinen, P., Koivumäki, T. (2012). Managerial perspective on open source collaboration and net-worked innovation. Journal of Technology Management & Innovation, 7(3), 135-147.
HENTULA, M., Tonteri, H., Pursula, P., Montonen, J. (2005). RFID in recycling data management of electric and electronic equipment.VTT Industrial System Paper. https://virtual.vtt.fi/virtual/etek/raportti/etek_researchreport.pdf [Accessed January 17, 2012]
HEWAGE, K.N., Janaka, Y.R., Jergeas, G.F. (2008). IT usage in Alberta’s building construction projects: Current status and challenges. Automation in Construction, 17(8), 940-947.
HONARPOUR, A., Jusoh, A., Nor, K. (2012). Knowledge management, total Quality management and innovation: A new look. Journal of Technology Management & Innovation, 7(3), 22-31.
IDTECHEX REPORT, (2010). RFID forecasts, players, and opportunities 2007-2017. http://www.idtechx.com. [Accessed January 17, 2012]
ISHENG, L., Huang, G., Li, H. (2011). Scenarios for applying RFID technology in construction project management. Automation in Construction, 20(2), 101-106.
JASELSKIS, E.J., Cackler, E.T., Walters, R.C., Zhang, J., Kaew-moracharoen, M. (2006). Using scanning lasers for real-time pavement thickness measurement. National Concrete Pavement Technology Center Paper, Iowa State University. http://www.ctre.iastate.edu/reports/scanning_lasers_web.pdf. [Ac- cessed January 20, 2012]
KIRITSIS, D., Jun, H.B., Xirouchakis, P. (2007). Closing product information loops with product-embedded information devices: RFID technology and applications, models and metrics. In RFID technology and applications. New York: Cambridge University Press, pp. 169-181.
MAGAL, S.R., Feng, M., Essex, P.A. (2001). An exploratory study of a web-based electronic commerce application. Journal of Information Technology Theory and Application, 3(5), 1-24.
MAK, S. (2001).A model of information management in construction using information technology. Automation in Construction, 10(2), 257-263.
MARTIN, J. (2003). E-procurement and extranets in the UK construction industry. In Proceedings of the 125th FIG Working Week, Paris, France, April 2003.
MASTERMAN, J. W. E. (2002). Introduction to building procurement systems.Taylor & Francis, London.
MASTURA, J., Ramayah, T., Abdul-Rashid, A., Basri, S. (2007). Technology readiness among managers of Malaysian construction firms. Engineering, Construction and Architectural Management, 14(2), 180-191.
MENTZER, J.T. (2001). Supply chain management. Sage Publications,Thousand Oaks.
MILES, M.B., Huberman, A.M. (1994). Qualitative data analysis. Sage Publications,Thousand Oaks.
MOTAMEDI, A., Hammad, A. (2009). RFID-assisted lifecycle management of building components using BIM data. In Proceedings of the 26th International Symposium on Automation and Robotics in Construction (ISARC 2009), Austin, USA, June 2009.
NCCTP, (2006). Proving Collaboration Pays – Study Report, NCCTP, http://www.ncctp.net. [Accessed Septembre 19, 2012]
NGAI, E.W.T., Moon, K.K.L., Riggins, F.J.,Yi, C.Y. (2006). RFID research:An academic literature review (1995–2005) and future research directions. International Journal of Production Economics, 112(2), 510-520.
NONAKA, I. (1994). A dynamic theory of organizational knowledge creation. Organization Science, 5(1), 14-37.
ORGANISATION FOR ECONOMIC CO-OPERATION AND DEVELOPMENT, (2008). Competition in the construction industry. http://www.oecd.org/dataoecd/32/55/41765075.pdf. [Accessed January 15, 2012]
OLUGBODE, M., Rhodri, R., Biss,T. (2007).The role of information technology in achieving the organisation’s strategic development goals: A case study. Journal of Information Systems, 32(5), 641-648.
OYE, N.D., Inuwa, I., Shakil, A.M. (2011). Role of information communication technology (ICT): implications on unemployment and Nigerian GDP. Journal of International Academic Research, 11(1), 9-17.
PEANSUPAP, V., Walker, D. (2005). Factors affecting ICT diffusion: A case study of three large Australian construction contractors. Engineering, Construction and Architectural Management, 12(1), 21-37
RADOSAVLJEVI, M. (2007). How could the construction supply chain benefit from RFID/GPS integration: A knowledge management perspective. In Proceedings of the CIB W102 3rd International Conference, Stuttgart, Germany.
REICH, B.H., Gemino, A., Sauer, C. (2012). Knowledge management and project-based knowledge in it projects:A model and preliminary empirical results. International Journal of Project Management, 30(6), 663-674.
REN, Z., Anumba, C.J., Tah, J. (2011). RFID-facilitated construction materials management (RFID-CMM) – A case study of a water-supply project.Advanced Engineering Informatics, 25(2), 98-207.
ROSLI, A.R., Taib, I.M., Wan, B., Wan, A., Nasid, M. A., Wan, N., Wan, A., Zainordin, Z.M. (2006). Effect of procurement systems on the performance of construction projects. Padang, Indonesia.
SARDROUD, M., Limbachiya, M.C. (2010). Improving construction supply chain management with integrated application of RFID technology and portal system. In Proceedings of the 8th International Conference on Logistics and SCM Research (RIRL 2010), Bordeaux, France, September 2010.
SCHULTMANN, F., Sunke, N. (2008). Life cycle information of buildings supported by RFID technologies. 1st International Conference on Industrialised, Integrated, Intelligent Construction (I3CON), Loughborough, UK, May 2008.
SHIN,T.H., Chin, S.,Yoon, S.W., Kwon, S.W. (2011).A service- oriented integrated information framework for RFID/WSN- based intelligent construction supply chain management. Automation in Construction, 20(6), 661-740.
SONG, J., Caldos, C., Ergen, E., Haas, C., Akinci, B. (2004). Field trials of RFID technology for tracking prefabricated pipe spools. In Proceedings of the 21st International Symposium on Automation and Robotics in Construction (ISARC 2004), Jeju, Korea, September 2004.
STEWART, R.A. (2007). IT enhanced project information management in construction: Pathways to improved performance and strategic competitiveness. Automation in Construction, 16(4), 511-517.
STUCKHART, G. (1995). Construction materials management. Marcel Dekker, Inc., New York.
TOLSON, S. (2007). Procurement and supply contracts in the construction industry. http://www.fenwickelliott.co.uk. [Accessed January 25, 2012]
TZENG, C.T., Chiang, Y.C., Chiang, C.M., Lai, C.M. (2008). Combination of radio frequency identification (RFID) and field verification tests of interior decorating materials.Automation in Construction, 18(1), 16-23.
VAN GASSEL, F., Glenco, J. (2008). A simulation tool for radio frequency identification construction supply chains. In Proceedings of the 25th International Symposium on Automation and Robotics in Construction (ISARC-2008),Vilnius, Lithuania, June 2008.
VANITA, A., Yang, J., Ravi, S. (2009) Study of ICT adoption for building project management in the Indian construction industry. Automation in Construction, 18(4), 415-423.
VIJAYARAMAN, B.S., Osyk, B.A., and Chavada, D. (2008). An exploratory study of RFID adoption in the paperboard packaging industry. Journal of Technology Management & Innovation, 3(4), 95-110.
WAMBA, S.F., Lefebvre, L. A., and Lefebvre, E. (2007). Integrating RFID technology and EPC networks into a B2B retail supply chain: A step toward intelligent business processes. Journal of Technology Management & Innovation, 2(2), 114-124.
WANG, L. (2008). Enhancing construction quality in management using RFID technology. Automation in Construction, 17(4), 467-479.
WANG, L., Lin, Y., Pao, H. (2007). Dynamic mobile RFID- based supply chain control and management system in construction. Advanced Engineering Informatics, 21(4), 377-390.
WEN, L., Zailani, S., Fernando, Y. (2009). Determinants of RFID adoption in the supply chain among manufacturing companies in China: A discriminatory analysis. Journal of Technology Management & Innovation, 4(1), 22-32.
WILKINSON, P. (2005). Construction collaboration technologies: The extranet revolution.Taylor & Francis, London.
WILLIAM, J. P. (2006). Collaboration in the supply chain speeds innovation. http://www.industryweek.com. [Accessed January 27, 2012]
WILLIAMS, T., Bernold, L., Lu, H. (2007). Adoption patterns of advanced information technologies in the construction industries of the United States and Korea. Journal of Construction Engineering and Management, 133(10), 780-790.
WING, R. (2006). RFID applications in construction and facilities management. Electronic Journal of Information Technology in Construction, 11, 711-721.
XUE, X.L., Li, X.D., Shen, Q.P., Wang, Y.W. (2005). An agent-based framework for supply chain coordination in construction. Automation in Construction, 14(3), 413-430.
XUE, X.L., Wang, Y.W., Shen, Q.P. (2007). The application of ICT in collaborative working in construction projects: A critical review. In Proceedings of the 2007 International Conference on Convergence Information Technology (IC-CIT 2007), Jeju Island, Korea, November 2007.
YABUKI, N., Oyama,T. (2007).Application of radio frequency identification technology for management of light weight temporary facility members. In Proceedings of the 2007 ASCE International Workshop on Computing in Civil Engineering, Pittsburgh, USA, July 2007.
YIN, R.K. (1994). Case study research: Design and methods. Sage Publishing,Thousand Oaks.
ZACK, M.H. (2002). Developing a knowledge strategy: Epilogue. In The strategic management of intellectual capital and organizational knowledge: A collection of readings. Oxford, UK: Oxford University Press, pp. 255-268.
ZIETSMAN, E. (2007). How can information and communication technology reduce inefficiencies in the construction industry? http://www.cib2007.com. [Accessed January 27, 2012]
How to Cite
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).