Explanatory Definitions of the Technology Push Success Factors
Keywords:Technology push, Success factor, New product development, Survey instrument
The main task for most development-intensive organizations is to create, develop and commercialize new products and services. Because development processes are risky and failure rates are high, especially in the case of technology pushed projects, unambiguous success factors are valuable knowledge for the management of development-intensive firms. New product development and innovation literature has presented many success factors for developed products, but, unfortunately, many of them are nebulous in nature. The aim of this paper is to clarify what elements comprise the exact factors. After an extensive review and screening of the technology push success factor related literature, a total of 13 success factors were rationalized and transcribed according the previous literature. As a result, three separate keynotes were recognized, and the survey instrument framework was proposed. The practical relevance of this study is to help firm management to recognize the real actions needed to reduce product development risks and also to help scholars to focus on key issues when studying the key factors of breakthrough development cases.
BALACHANDRA, R. & FRIAR, J. (1997). Factors for success in R&D projects and new product innovation: A contextual framework. IEEE Transactions on Engineering Management, 44(3), 276-287. doi: 10.1109/17.618169
BASS, F.M. (1969). A new product growth model for consumer durables. Management Science, 15 (January), 215227. doi: 10.1287/mnsc.15.5.215
BERGEN, M. & PETERAF, M. (2002). Competitor identification and competitor analysis: A broad-based managerial approach. Managerial and Decision Economics, 23, 157-169. doi: 10.1002/mde.1059
BISHOP, G.L. & MAGLEBY, S.P. (2004). A review of technology push product development models and processes.
Proceedings of ASME DECT ’04, ASME, New York, NY, 383392. doi: 10.1115/detc2004-57496
BROSNAN, M. (1998). Technophobia: The psychological impact of information technology. Routledge, NY.
CALANTONE, R. & LI, T. (1998). The impact of market knowledge competence on new product advantage: conceptualization and empirical examination. Journal of
Marketing, 62 (4), 13-29. doi: 10.2307/1252284
CHEN, M. (1996). Competitor analysis and interfirm rivalry: toward a theoretical integration. Academy of Management Review, 21, 100-134. doi: 10.2307/258631
CHRISTENSEN, C. (1997). The innovator’s dilemma: when new technologies cause great firms to fail. Boston: Harvard Business School Press.
COOPER, R. & KLEINSCHMIDT, E. (1995). Benchmarking the firm’s critical success factors in new product development.
The Journal of Product Innovation Management, 12 (5), 374391. doi: 10.1111/1540-5885.1250374
DAVIS, F. (1989). Perceived usefulness, perceived ease of use, and user acceptance of information technology. MIS
Quarterly, 13(3), 319-340. doi: 10.2307/249008
ERNST, H. (2002). Success factors of new product development: a review of the empirical literature. International Journal of Management Reviews, 4(1), 1-40. doi: 10.1111/1468-2370.00075
FREEL, M. (2003). Sectoral patterns of small firm innovation, networking and proximity. Research Policy, 32, 751-770. doi: 10.1016/s0048-7333(02)00084-7
FREEMAN, C. (1982). Schumpeter or Schmookler?. In C. Freeman, J. Clark & L. Soete (Eds.), Unemployment and Technical Innovation. London: Pinter.
GREEN, S., GAVIN, M. & AIMAN-SMITH L. (1995) Assessing a multidimensional measure of radical technological innovation. IEEE Transactions on Engineering Management, 42(3), 203-214. doi: 10.1109/17.403738
GRIFFIN, A. & HAUSER, J. (1996). Integrating R&D and Marketing: A review and analysis of the literature. Journal of Product Innovation Management, 13 (3), 191-215. doi: 10.1111/1540-5885.1330191
HERSTATT, C. & LETTL, C. (2004). Management of ‘technology push’ development projects. International Journal of Technology Management, 27(2-3), 155-175. doi:10.1504/ijtm.2004.003950
ISAACSON, W. (2011). Steve Jobs. Otava: Keuruu.
JAY, T. (1981). Computerphobia. What to do about it. Educational Technology, 21, 47-48.
KOTLER, P. & ARMSTRONG, G. (1987). Marketing – An Introduction. Prentice-Hall, NJ.
KRISTENSSON, P., GUSTAFSSON, A. & ARCHER, T. (2004). Harnessing the creative potential among users. Journal of Product Innovation Management, 21, 4-14. doi: 10.1111/j.0737-6782.2004.00050.x
LEDWITH, A. & COUGHLAN, P. (2005). Splendid isolation: Does networking really increase new product success? Creativity and Innovation Management, 14 (4), 366-373. doi: 10.1111/j.1467-8691.2005.00356.x
LEWITT, T. (1960). Marketing myopia. Harvard Business Review, 38(4), 45-56.
MAHAJAN, V., MULLER, E. & BASS, F.M. (1990). New product diffusion models in marketing: A review and directions for research. Journal of Marketing, 54 (January), 1-26. doi: 10.2307/1252170
MAHAJAN, V. & WIND, Y. (1986). Innovation diffusion models of new product acceptance. Cambridge, MA: Ballinger Publishing Company.
MARQUIS, D. & STRAIGHT, D. (1965). Organizational factors in project performance. Cambridge, MA: MIT Sloan School of Management Working Paper.
McDERMOTT, C. & O’CONNOR, G. (2002). Managing radical innovation: An overview of emergent strategy issues.
The Journal of Product Innovation Management, 19(6), 424438. doi: 10.1111/1540-5885.1960424
MUNRO, H. & NOORI, H. (1988). Measuring commitment to new manufacturing technology: Integrating technological push and marketing pull concepts. IEEE Transactions on Engineering Management, 35(2), 63-70. doi: 10.1109/17.6006
NARAYANAN, S. (1992). Incorporating heterogeneous adoption rates in new product diffusion: A model and empirical investigations. Marketing Letters, 3(4), 395-406. doi: 10.1007/bf00993923
PETERAF, M. & BERGEN, M. (2002). Competitor identification and competitor analysis: a broad-based managerial approach. Managerial and decision economics. 23(4-5), 157-169. doi: 10.1002/mde.1059
PETERAF, M. & BERGEN, M. (2003). Scanning dynamic competitive landscapes: A market-based and resource-based framework. Strategic Management Journal, 24, 1027-1041. doi: 10.1002/smj.325
RAGATZ, G., HANDFIELD, R. & PETERSON, K. (2002). Benefits associated with supplier integration into new product development under conditions of technology uncertainty. Journal of Business Research, 55, 389-400. doi:
ROGERS, E. (1962). Diffusion of innovations. Free Press, NY.
ROSEN, L. & WEIL, M. (1990). Computers, classroom instruction and the computerphobic university student. Collegiate Microcomputer, 8(4), 257-283.
SAMLI, A.C. & WEBER, J.A.E. (2000). A theory of successful product breakthrough management: Learning from success. Journal of Product & Brand Management, 9(1), 35-55. doi: 10.1108/10610420010316320
SARJA, J. (2012). A review of the Getting Real software development approach. Int. J. Agile and Extreme Software Development, 1(1), 78-94. doi: 10.1504/ijaesd.2012.048301 SARJA, J. (2015, in press). Key factors of successful technology push projects in the ICT context: A review of the literature. International Journal of Information Technology and Management.
SOUDER, W. E. (1989). Improving productivity through technology push. Research Technology Management, 32(2), 19-31. doi: 10.1016/0737-6782(89)90092-1
SULTAN, F., FARLEY, J. & LEHMANN, D. (1990). A metaanalysis of diffusion models. Journal of Marketing Research, 22 (February), 70-77. doi: 10.2307/3172552
TSENG, H. & CHEN, W. (2004). A replacement consideration for the end-of-life product in the green life cycle environment.
Int. J. of Advanced Manufacturing Technology, 24(11-12), 925931. doi: 10.1007/s00170-003-1809-5
ULRICH, K.T. & EPPINGER, S.D. (2008). Product Design and Development. Irwin/McGraw-Hill.
VENKATESH, V. & BALA, H. (2008). Technology acceptance model 3 and a research agenda on interventions.
Decision Sciences, 39(2), 273-315. doi: 10.1111/j.15405915.2008.00192.x
VENKATESH, V. & DAVIS, F. (2000). A theoretical extension of the technology acceptance model: four longitudinal field studies. Management Science, 46(2), 186-204. doi: 10.1287/ mnsc.188.8.131.5226
VENKATESH, V., MORRIS, M., DAVIS, G. & DAVIS, F. (2003). User acceptance of information technology: toward a unified view. MIS Quarterly, 27(3), 425-478.
VON HIPPEL, E. (1988). The Sources of Innovation. Oxford University Press: Oxford
ZMUD, R.W. (1984). An Examination of “Push-Pull” Theory Applied to Process Innovation in Knowledge Work. Management Science, 30(6), 727-738. doi: 10.1287/ mnsc.30.6.727
How to Cite
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).